This machine is the SPL (Large Opening Smoothing Press) for lamination of foam parts up to 6" thick. It has an extended input table and guard to allow feeding of thick sheets of material.
Output side of ACP showing air cylinders that pull down upper roll to give up to 800 lbs. of squeeze force.
This ACP (Assembly Compression Press) is equipped with digital height indicators and extended input guards to allow it handle lamination of thick parts.
This is a smoothing press with digital height indicators to show the opening between the rolls, and a pair of oversize input tables to assist in lamination of parts.
The "Lamination Station" is an RT hotmelt coater coupled to a smoothing press so parts can be glued and laminated at one time. In this version the glued part is being laminated to release paper.
This is a 32" wide ACP (Assembly Compression Press) with an "active" guard. If the upper guard plate is lifted the machine will stop and the rolls open up.
Large vacuum feeder to automatically feed labels into Sheet Cementer or Topside Coater.
This is an adhesive recirculation system fitted to a 38" sheet cementer. This maintains a constant adhesive level in the glue tank and recirculates adhesive from the reservoir below the machine.