Sheet Cementers (TL)

Sheet Cementers are adhesive roll coating machines that are used to apply a thin layer of adhesive to large labels or printed sheets for mounting to corrugated, chipboard, or foam core board.

Sizes – TL: 9″, 12″, 18″, 24″, 32″, 38″, 42″, 50″.

Sheet cementing machines are available with several different feed roller arrangements for application of adhesive to parts from paper thickness to 4″ thick, and are available in coating roller widths from 9″ to 50″.
These machines can apply almost any type of water base adhesive – including latex cement. These machines can also be used for the application of U.V. cure adhesive. They are equipped with a low speed glue pickup roller which minimizes adhesive foaming.
Sheet cementing machines have stainless steel adhesive tanks, coating roller and feed rollers, and are designed for quick cleanup. The glue tank slides out of the machine and is covered to keep the adhesive from drying. A wash tank then is slid into the machine and the rolls cleaned with water. Cleanup can be done in about 5 minutes.
Sheet cementers are most commonly used to apply adhesive to printed sheets for the creation of attractive packaging as well as point of purchase display materials. They can also be used for poster and print mounting, photo mounting, and for glue application to materials such as chipboard, corrugated, plastics, foam, rubber and fabrics.


  •  220V (50 or 60 cycle)
  • Variable speed drive (DC)
  • Floor stand with casters
  • Explosion proof motor
  • Special widths available on request
  • Paper stock feed, for parts up to .025 thick
  • Boardstock feed, for parts up to 1″ thick
  • Thick stock feed, for parts up to 6″ thick

%d bloggers like this: